ARC TOOTH INDUSTRIAL TIMING BELT 9SYNCHRONOUS BELT)
Feature
Our Timing Belt uses Japan-imported high quality synthetic neoprene, high quality glass fiber cord and tooth surface with nylon 66 high stretch do the protection. The timing belt adapts teeth or teeth mesh to transfer power. It needs no lubrication, no slip, no pollution, less noise. The transmission efficiency is over 98%, and the speed ratio can reach 1:10. Linear velocity can be up to 50m/s. Its dynamic bending wind gives a good fatigue performance, and good aging heat-resistance abrasion performance.
Modes and Parameters
Type |
Pitch (pb) mm |
Tooth height (ht) mm |
Belt thick (hs) mm |
Angle |
HTD |
2M |
2 |
0.75 |
1.36º |
3M |
3 |
1.17 |
2.4º |
5M |
5 |
2.06 |
3.8º |
8M |
8 |
3.36 |
6.0º |
14M |
14 |
6.02 |
10.0º |
20M |
20 |
8.40 |
13.2º |
STPD/STS |
S2M |
2 |
0.76 |
1.36º |
S3M |
3 |
1.14 |
2.2º |
S4.5M |
4.5 |
1.71 |
2.81º |
S5M |
5 |
1.91 |
3.4º |
S8M |
8 |
3.05 |
5.3º |
S14M |
14 |
5.30 |
10.2º |
RPP/HPPD |
2M |
2 |
0.76 |
1.36º |
3M |
3 |
1.15 |
1.9º |
5M |
5 |
1.95 |
3.5º |
8M |
8 |
3.20 |
5.5º |
14M |
14 |
6.00 |
10.0º |
Marking
HTD 755 -5M -50MM means that this belt is of HTD tooth type, and its pitch length is 755mm. Its tooth is of 5M type, and its width is 50mm.
FAQ
Q1. Can I have a sample order?
Yes, any sample order is welcome to know the quality of our products.
Q2. What about the lead time of the sample or the final order?
2-5 days for normal sample.
20-30 days for a formal order.
Q3. How much is the minimum quantity for each item in one order?
One mould quantity is ok. Usually around 50pcs for small items, 10pcs for big items.
Q4. Is it possible to print our logo or brand on the belt?
Yes, we can print your logo or design on the belt after receipt of your formal authorization letter of the logo or your brand.
Q5. Do you offer the guarantee for your product?
Yes, usually we offer one year warranty for all of our products.